Complete PLC & Classic control (Software-Hardware) Designs

Hands on PLC & classic controlling systems using A-B RSLogix,Siemens TIA Portal,Logixpro,FactoryI/O & Hardware projects

What you’ll learn
Design the different automation controlling circuit using switches , Relays , Contactors timers & circuit breakers
Design complete PLC ladder codes using Siemens TIA Portal , RSLogix500 , LogixPro
Implement factoryI/O sorting by height PLC automation system (COURSE PROJECT)
Implement the 2 out of 4 Automatic Transfer Switch( ATS) (COURSE PROJECT)
Learn about the PLC analog and digital signals and how to control each of them
Design the PLC temperature controlling system using Lm35 temp. sensor (software/hardware design)
Design the PLC temperature controlling system using PT100 temp. sensor (software/hardware design)
Design the PLC S7-1200 analog input ladder codes
Implement the Siemens S7-1200 PLC hardware wiring & configuration
Design the PLC Start/Stop controlling system (software/hardware design)
Implement the PLC industrial fans interlocking system (software/hardware design)
Implement the PLC industrial fans one-way automation system (software/hardware design)
Design the Door Automation system PLC design on Logixpro
Design the Silo Automation system PLC design on Logixpro
Get your hands on the basic & advanced Allen-Bradley PLC programming on RSLogix500 & logixpro simulator
Get your hands on the basic & advanced Siemens PLC programming on TIA Portal & PLCSIM simulator
Implement the industrial fans sequential operation PLC automation system (software/hardware design)
Implement the industrial fans closed loop PLC automation system (software/hardware design)
Implement the single bush button start/stop PLC automation system (software/hardware design)
Learn about the different types of proximity sensors (software/hardware design)
designs classic controlling system on EKTS software
Design the Start/Stop classic controlling system (software/hardware design)
Design the Three phase induction motor direction controlling system (software/hardware design)
Design the dahlander motor controlling system
Design the start/Delta classic controlling system (software/hardware design)
Understand the working operation of different types of classic controlling timers TON ,TOF , TOR
Implement the optimized Star/Delta classic controlling system (software/hardware design)
Design the motors Closed loop controlling system (software/hardware design)
Design the motors one way controlling system (software/hardware design)
Implement the optimized Forward/Reverse classic controlling system (software/hardware design)

Requirements
computer !
passion to learn !

Description
here you will start from scratch practicing PLC programming & controlling software designs to be more confident with
your PLC experience and skills.

“PLC , Automation control Classic controlling systems are one of the most important system for
any industrial system or factory “.

Hello there,

If the word ‘PLC’ baffles your mind and you want to master it, then this is for you.

If you want to start your career in PLC and classic controlling systems design and make money from it, then is for you.

If you want to learn how to design PLC automation system for any Project, then this course is for you.

If you get bored of the word ‘this course is for you’, then this course is for you.

if you love the controlling engineering.

Well, PLC and classing controlling systems are becoming widely-used words on everybody’s tongue, and this is reasonable as most the buildings and industrial systems and factories must include the PLC for automation and classic controlling systems .

So we introduce to you the “Complete PLC & classic control (software/hardware) designs” course that you need in order to get your hand on the PLC and Automation design as this course collects most of the knowledge that you’ll need in your journey.

We believe that the brain loves to keep the information that it finds applicable, and that’s what we’re doing here in UNITED ENGINEERING, we give you years of practice from our instructor that have been gathered in just one an interesting dose.

Our course is structured as follows

Discuss the different types of controlling switches (software/hardware) design .

Discuss the different types of controlling Relays (software/hardware) design.

Discuss the different types of controlling Contactors (software/hardware)design.

Learn about the Overcurrent relays.

Learn about the different kinds of circuit breakers.

Learn about the PLC programming fundamental.

Implement the PLC start stop controlling system(software/hardware) design.

Design the Siemens S7-1200 PLC configuration, wiring & programming on TIA Portal.

Design the industrial fans interlocking PLC automation system (software/hardware) design.

Design the industrial fans One-way PLC automation system (software/hardware) design.

Implement the Door PLC automation system on Logixpro simulator.

Implement the Silo PLC automation system on Logixpro simulator.

Learn about the Allen-Bradley PLC timers.

Design the industrial fans sequential operation PLC automation system (software/hardware) design.

Learn about the Allen-Bradley PLC counters.

Design the single pushbutton Start/Stop PLC project (software/hardware)design.

Discuss the different types of proximity sensors(software/hardware)design.

Discuss the PLC analog signals controlling fundamentals & hardware applications.

Design the PLC temperature controlling system using Lm35 temp. sensor (software/hardware) design.

Design the PLC temperature controlling system using the RTD PT100 temp. sensor (software/hardware )design.

Learn the Allen-Bradley advanced PLC programming with RSLogix500.

Learn the Siemens advanced PLC programming with TIA portal.

Implement the “advanced sorting by height” Factory I/O PLC automation system (first course project ).

Design the Start/stop classic controlling system (software/hardware) design.

Design the Three phase induction motor direction controlling system.

Implement the Star/delta classic controlling system (software/hardware) design.

Learn about the Dahlader motor Classic controlling system.

Lean about the timers in classic controlling systems (software/hardware) design.

Optimize the star/Delta classic controlling system (software/hardware) design.

Design the motors closed loop classic controlling system(software/hardware) design.

Design the motors one way controlling system(software/hardware) design.

Optimize the Forward/Reverse classic controlling system (software/hardware) design.

Implement the 2 out of 4 ATS (automatic transfer switch) controlling system (second course project ).

** At this course

These tracks would be like a piece of cake to you.

You will start practicing yourself by solving excrescences and coding assignments to get your hands on PLC programing and
real world projects implementation.

We’ll take you from the Scratch of Designing and Analysis.

You’ll learn with practical exciting method in order to understand without being bored.

All you need is an open mind and the passion to be successful!

** Our help in United Engineering is always available to you if you get stuck or have a question – our support is legendary in Udemy

Who this course is for
Anyone who wants to learn and practice PLC and different Automation controlling systems & designs from scratch to the advanced level
Electrical ,Controlling ,Electronics engineers
maintenance engineers
Industrial , production engineers
PLC programmers
electrical technicians
Automation systems designers