Learn PCB Printed Circuit Board: A Complete Bundle

What you’ll learn
Make PCB with Zero Experience in Electronics
Learn basic to advance PCB design
Create your own custom Printed Circuit Board (PCB).
Route Printed Circuit Board (PCB)
Track you errors in seconds
Learn Proteus Software, Fritizing and Altium Designer all in one Course
Create and design a custom Arduino Nano in Altium Designer
Design and Manufacture any PCB that comes in your mind
Draw schematic of an Arduino Nano and wire components
Create your own custom components and component library
Auto route to speed up the routing process
Compile design detect and eliminate design errors
Define board shape and size
Route Printed Circuit Board (PCB)
Eliminate errors and reduce manufacturing board iterations by Using design rule checker
Draw a schematic of your circuit in few simple steps
Auto Route to speed up the routing process
Make A PCB in the shortest possible time
Prototype your kickstarter idea
Get a job in PCB design
Make a professional Printed Circuit electronic board PCB for your circuit.
Simulate 3D PCB

Requirements
Time, Dedication and Patience to learn and implement new knowledge.
A Computer or Laptop with any operating system
The Software that will be used to create the PCB Provided in the first Section (FREE)
Basic experience in Electronics
No materials required if you only wish to view the course
Have A basic Experience in browsing the internet
Description
This Bundle Consists of More than 80 Lecture with more than 6 hours of HD Video Content and supplementary material in which we cover more than four different software used to design, and fabricate PCB (Printed Circuit Board), I can assure you that after this course you will be a professional in PCB Printed Circuit Board design and fabrication.
You will get the chance to learn:
PCB Design and Fabrication using Frtizing Software
PCB Design: Master Designing Printed Circuit Board using Proteus Software
PCB Design: Make Arduino Nano using Altium Designer
3D Simulation: Microcontrollers, Electronics, Mechanism, PCB using Yenka Software
Let’s talk in more details about each Section
PCB Design and Fabrication For Everyone
Learn Printed Circuit Board (PCB) design from Scratch With Zero Experience in Electronics, No Effort and a Free Software
>>> This course is a first of its kind in which you will learn from start to finish on how to design your own Printed Circuit Board (PCB) with Zero Experience in Electronics and Circuit Design, YES, you did hear me, No experience is required at all.
Welcome to this course.
This course will help you to gain PCB design skills which will help you to get started freelancing or to get a job in PCB design with a Free Software being one of the top PCB design tools used around the world, so you won’t have to pay anything for the software and it has tons of library for almost every component in electronics industry.
Printed Circuit Board design is very interesting for any electronics geek, microcontroller programmers anyone wishing to build his own PCB by themselves. It is very simple and easy to understand for beginners.
No Previous Experience + Free Software + Time Saving Techniques = Perfect PCB Design
This is available for your in this course + Bonuses and additional Material + PCB Design Software.
———————-
PCB Design: Master Designing Printed Circuit Board
A-Z Guide to designing, testing and Manufacturing any electronic circuit, using the most popular electronic software.
>>> A-Z Guide to designing, drawing and testing any electronic circuit that comes in hand, using one of the most popular software in the electronics industry, after this course you will be a master at making your own electric circuit board.
Welcome to this course.
You will become professional in making your own electronics circuits, you will even be able to master mass producing any electronics circuit that you find useful.
Video and Text lectures are included along with the software package that will be used in this course.
The course begins with introducing electronic circuit design then lessons for beginners to allow you become an expert, then at the end we will make a more advanced circuit and prepare it for mass production like professional.
All what you need for this course is your laptop and headphones.
This course is open for comments and suggestions.
Why you should take this course, well, because you will learn by doing not by listening and you will become an expert in making your own circuits.
————————–
3D Simulation: Microcontrollers, Electronics, Mechanism, PCB
Enter the world of 3D simulation and have fun learning and teaching Microcontroller Electronics, Mechanical and PCB
>>> 3D simulators nowadays are covering all aspects of the electronic design process, in 3D. In this course you will get the chance to explore the wonders of 3D simulation of a limitless range of circuit boards, a 2D circuit design tools, and also PIC microcontroller simulation, testing and programming.
Welcome to this course.
You will get the chance to learn:
3D Electronic simulation and design
PIC microcontroller programming
Flowcharting
3D PCB simulation
3D mechanisms
Measurement
What You Will learn in This Course
What is Crocodile Technology
Why it is helpful to simulate and design in 3D
Download and Install the Software
User Interface Introduction
Design and Simulate ON/OFF Switches Circuits
Design and Simulate Microcontroller Systems
Flowcharting.
Design and Simulate Simple Led On/Off Circuits
Design and Simulate Simple Led Flasher Circuits
Design and Simulate Simple 7 Segment Circuits
Design and Simulate Counter using 7 Segment Circuits
Design and Simulate Motors
This will be a journey of a life time for everyone looking for a new vision in Engineering Simulation, easy to use and really helpful software will be introduced.
—————————————————————
PCB Design: Make Arduino Nano using Altium Designer
Learn Printed Circuit Board design by Making Arduino Nano in Altium Designer Software.
>>> Learn Printed Circuit Board design by Making Arduino Nano in Altium Designer Software.
Welcome to this course.
What is this course about:
In This course you will learn from start to finish, from zero to production ready on how to design custom Arduino Nano Printed Circuit Board . It will help you to improve your PCB design skills which will help you to get started freelancing or to get a job in PCB design with Altium Designer since it’s the most used PCB design tools
———————————————————————
What you should expect after taking this course:
Get started PCB design using Altium Designer.
Download and install Altium designer.
Create your own component library so that you can create your own components that you don’t have a library for which will help you freelance online since many jobs ask to create component libraries.
Create the Arduino Nano Schematic in Altium designer.
Wiring components in Schematic view.
Transfer schematic into PCB.
Place components on board.
Create a multilayer board.
Route layers and place components on board.
Autoroute to save time.
Eliminate design errors.
Create Gerber files for your manufacturer.
—————————————————-
Who this course is for:
Learn basic to intermediate PCB design
Have a tech kickstarter idea, that you want to get of the ground
Want to create your own custom Arduino Printed Circuit Board (PCB).
Want to get a job in PCB design
Want to learn Altium Designer in the shortest possible time.
Want to get started creating cool gadgets
Circuit Designers
PCB Designers
Circuits Creators